Validated Peracetic Acid Test Strips

    Validated Peracetic Acid Test Strips

    Test Strips HD

    510 (k) Peracetic Acid Test Strips

    Minncare HD Test Strips provide quick results with easy-to-read indicators with the assurance of accurate results associated with a 510(k) medical device. Use the Minncare HD 1% TS Test Strips as a pass/fail measurement for adequate concentration of sterilant after dilution. Then verify residual levels after rinse-out using Minncare HD Residual Test Strips.

     

     

     

Minncare HD 1% Test Strips
Minncare HD 1% Test Strips verify adequate concentration of a 1% Minncare solution during sanitization of your hemodialysis water purification system. These convenient dip-and-read strips can be used at any test port in your system to provide an accurate pass/ fail measurement of Minncare HD Disinfectant..
Minncare HD Residual Test Strips
Minncare HD Residual Test Strips are easy to use and are conveniently packaged 100 test strips per container. Each strip has a “reaction zone” pad located at one end of the strip. When stored and used properly, the test strip pad can indicate residual Minncare HD levels as low as 1 part per million (ppm). The reaction zones are set to provide six different reading levels at 100, 30, 10, 3, 1 and 0 (zero) parts per million.
 
 
Minncare Cold Sterilant Brochure
Minncare HD Disinfectant 
Datasheet

(P/N: 3029823)
                                                                                                                                       

 


Copyright © 2016 Mar Cor Purification. All Rights Reserved.