Validated Peracetic Acid Test Strips

    Validated Peracetic Acid Test Strips

    Test Strips

    Validated Peracetic Acid Test Strips

    Minncare Test Strips provide quick results with easyto-read indicators. Use the Minncare 1% TS Test Strips as a pass/fail measurement for adequate concentration of sterilant after dilution. Then verify residual levels after rinse-out using Minncare Residual Test Strips.

     

     

     

Minncare 1% Test Strips
Minncare 1% Test Strips verify adequate concentration of a 1% Minncare solution during sanitization of your high purity water system. These convenient dip-and-read strips can be used at any test port in your system to provide an accurate pass/fail measurement of Minncare solution.
Minncare Residual Test Strips
Minncare Residual Test Strips are easy to use and are conveniently packaged 100 test strips per container. Each strip has a “reaction zone” pad located at one end of the strip. When stored and used properly, the test strip pad can indicate residual Minncare levels as low as 1 part per million (ppm). The reaction zones are set to provide six different reading levels at 100, 30, 10, 3, 1 and 0 (zero) parts per million
 
 
Minncare Cold Sterilant Brochure

Minncare Cold Sterilant Brochure 

(P/N: 50900-888)

                                                                                                                                          

 

Copyright © 2016 Mar Cor Purification. All Rights Reserved.